Made in Britain, Heard Worldwide

XT4004EQ

Availability: In stock

Excl. Tax: £1,535.00 Incl. Tax: £1,842.00
OR

Quick Overview

The XT4004EQ sits in the middle of the four channel amps outputting 1000 watts of great sounding class AB sound per channel from its 8.5kg chassis. The EQ models incorporate a variable high / low pass filter on each channel swept from 70Hz up and additional operational modes when compared to the non EQ models.

This four channel amp is equally at home powering the top end end of a large system, wedge monitors, large sub / satellite systems and high powered bass bins. If the XT4004EQ has a little more power than you require than please look at the XT2004EQ, likewise if you require a little more power than please look at the XT6004EQ.

XT4004EQ

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

The XT4004EQ sits in the middle of the four channel amps outputting 1000 watts of great sounding class AB sound per channel from its 8.5kg chassis. The EQ models incorporate a variable high / low pass filter on each channel swept from 70Hz up and additional operational modes when compared to the non EQ models.

We have customers using them with

  • high powered compression driver arrays for large systems
  • wedge monitor racks
  • medium sized top boxes requiring up to 1000 watts at 4 ohm


A selector on the input channels allows the source being fed to channel A to also feed channel B. Channel C and also be used as the source for channel D. The optional use of the high / low pass filters present on each channel enables a user to configure a stereo feed from a mixer to power a sub / satellite system without the need for a crossover or speaker management system.

The bridged mode enables each channel pair to deliver 2000 watts into an 8 ohm load.

The switched mode power supply ensures that plenty of power is available for the output stage to faithfully reproduce every transient in your original source material.

Twin dual speed temperature controlled 80mm long-life fans draw air through the front, exhausting heat from the rear of the rack.

The amplifier has fully balanced Neutrik XLR inputs, Neutrik Speakon® NL4 output sockets and is connected to the mains by a fused 20A Powercon inlet.

If the XT4004EQ has a little more power than you require than please look at the XT2004EQ, likewise if you require a little more power than please look at the XT6004EQ.

Number of channels:4
Height (RU):2U
Watts (rms) per channel, 8R:650
Watts (rms) per channel, 4R:1000
Watts (rms) per channel pair, 8R Bridged:2000
Average Supply Current, Full load:10A
Mains Connector:20A POWERCON
Frequency Response (±3dB ref 1kHz):8Hz – 24kHz
Signal to Noise Ratio (ref full power, 1kHz):102dB
THD (1kHz, full power):0.07%
THD (20Hz - 20kHz, full power):<0.1%
Slew Rate:69V/μs
Damping Factor (ref. 8R, 100Hz):>550
Cooling (Temperature Controlled Dual Speed Fan):2x 80mm Fan
Cooling Direction:Front to Back
Dimensions, mm:482 x 88 x 376
Weight:8.5kg

Files Attached: