Details
The XT4004 is the mid powered of the four channel amps, outputting 1000 watts of great sounding class AB sound per channel from its 8.4kg chassis.
We have customers using them with
- high powered compression driver large systems
- wedge monitor racks
- medium sized top boxes requiring up to 1000 watts at 4 ohm
- high efficiency sub / satellite systems.
The switched mode power supply ensures that plenty of power is available for the output stage to faithfully reproduce every transient in your original source material.
Twin dual speed temperature controlled 80mm long-life fans draw air through the front, exhausting heat from the rear of the rack.
The amplifier has fully balanced Neutrik XLR inputs, Neutrik Speakon® NL4 output sockets and is connected to the mains by a fused 20A Powercon inlet.
If the XT4004 does not quite have enough power for your needs then please have a look at the XT6004, likewise if the XT4004 is a little more power than you require than please look at the XT2004.
Number of channels:4
Height (RU):2U
Watts (rms) per channel, 8R:650
Watts (rms) per channel, 4R:1000
Average Supply Current, Full load:10A
Mains Connector:20A POWERCON
Frequency Response (±3dB ref 1kHz):8Hz – 24kHz
Signal to Noise Ratio (ref full power, 1kHz):102dB
THD (1kHz, full power):0.07%
THD (20Hz - 20kHz, full power):<0.1%
Slew Rate:69V/μs
Damping Factor (ref. 8R, 100Hz):>550
Cooling (Temperature Controlled Dual Speed Fan):2x 80mm Fan
Cooling Direction:Front to Back
Dimensions, mm:482 x 88 x 370
Weight:8.4kg