Details
Specially developed by Andy Hunt to offer more output power than previously offered in a class AB package, the best quality audio we offer is now available with more punch. The XT5000MF sits in the middle of the MF range of three amps, outputting 2500 watts of great sounding class AB sound per channel from its 8.4kg chassis.
We have customers using them with
- double kick bins
- very large top boxes requiring up to 2500 watts at 4 ohm
- pairs of subs requiring 2500 watts each at 4 ohm.
The switched mode power supply ensures that plenty of power is available for the output stage to faithfully reproduce every transient in your original source material.
The twin dual speed temperature controlled 80mm long-life fans draw air through the front, exhausting heat from the rear of the rack. An internal fan and additional heatsinks ensure the amp runs day and night, even when driven hard.
The amplifier has fully balanced Neutrik XLR inputs, with linked Neutrik XLR outputs, Neutrik Speakon® NL4 output sockets and is connected to the mains by a fused 32A Powercon inlet.
If you require a little more power in the 2u format please have a look at the XT5000MFs larger brother, the XT7000MF, likewise if the XT5000MF is a little too powerful for your needs then please have a look at the XT3000MF.
Number of channels:2
Height (RU):2U
Watts (rms) per channel, 8R:1800
Watts (rms) per channel, 4R:2500
Input Sensitivity: 1.4V
Voltage Gain: 37.0 dB
Average Supply Current, Full load:27A
Mains Connector:32A POWERCON
Frequency Response (±3dB ref 1kHz):8Hz – 24kHz
Signal to Noise Ratio (ref full power, 1kHz):101dB
THD (1kHz, full power):0.07%
THD (20Hz - 20kHz, full power):<0.1%
Slew Rate:69V/μs
Damping Factor (ref. 8R, 100Hz):>550
Cooling (Temperature Controlled Dual Speed Fan):2x 80mm Fan + 60mm internal fan
Cooling Direction:Front to Back
Dimensions, mm:482 x 88 x 400
Weight:8.4kg