Details
Andy Hunt created the MF range to offer customers the choice of using a class AB output stage with higher power requirement. The XT3000MF is the smallest of the MF range of three amps, outputting 1500 watts of great sounding class AB sound per channel from its 8.6kg chassis.
We have customers using them with
- kick bins
- large top boxes requiring up to 1500 watts at 4 ohm
- pairs of subs requiring 1500 watts each at 4 ohm.
The switched mode power supply ensures that plenty of power is available for the output stage to faithfully reproduce every transient in your original source material.
The twin dual speed temperature controlled 80mm long-life fans draw air through the front, exhausting heat from the rear of the rack. An internal fan and additional heatsinks ensure the amp runs day and night, even when driven hard.
The amplifier has fully balanced Neutrik XLR inputs, Neutrik Speakon® NL4 output sockets and is connected to the mains by a fused 32A Powercon inlet.
If you require a little more power in the 2u format please have a look at the XT3000MFs larger brother, the XT5000MF, likewise if the XT3000MF is a little too powerful for your needs then please have a look at the XT2000.
Number of channels:2
Height (RU):2U
Watts (rms) per channel, 8R:1000
Watts (rms) per channel, 4R:1500
Input Senstivity: 1.1V
VOltage Gain: 37.0dB
Average Supply Current, Full load:16A
Mains Connector:32A POWERCON
Frequency Response (±3dB ref 1kHz):8Hz – 24kHz
Signal to Noise Ratio (ref full power, 1kHz):99dB
THD (1kHz, full power):0.07%
THD (20Hz - 20kHz, full power):<0.1%
Slew Rate:65V/μs
Damping Factor (ref. 8R, 100Hz):>400
Cooling (Temperature Controlled Dual Speed Fan):2x 80mm Fan + 60mm internal fan
Cooling Direction:Front to Back
Dimensions, mm:482 x 88 x 400
Weight:8.6kg